For data with sizes of 5120x7160 and 8000x8000, the required buffer size
was calculated incorrectly during the encoding process, which caused the
requested buffer to be too large, resulting in drm exceptions.
Therefore, the method of calculating data has been modified.
Signed-off-by: Hongjin Li <vic.hong@rock-chips.com>
Change-Id: I519a76687118d568cf57e7d3d54a150e9019285c
rc2 test is a decode -> encode -> decode test case which can be used to
test the whole system codec capability.
1. Use new option module.
2. Add type for input file source stream.
3. Use decoder file reader to read input file.
Change-Id: Ia2334cd423e77a76c564478cc70c07a58954dd04
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
1. Use new option module in dec/enc test
2. Delete mpi_enc_multi_test and mpi_rc_test
Change-Id: Ib00020247386ee06cca2f560ae41aee8e88f47cc
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
vepu58x roi cfg generation is depended on vepu54x roi cfg.
1. Use roi_enable to enable roi test.
2. Use roi_type to test different roi config mode.
Old region mode is set to legacy now for future roi cfg will be more and
more complicated.
Change-Id: Ib9e8976b732f05625e7589b64752d38fbd83584b
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
1. All cases use reader to improve performance.
2. Rename cmd parser and create share data on cmd parsing.
3. Add reader_size function to get file size.
4. Change test log flag to -v options.
5. Fix FileBufSlot release MppBuffer issue.
6. Use index_read in multi test to improve performance.
Usage:
mpi_dec_test -i xxx.h264
Decode to the end of input stream.
mpi_dec_test -i xxx.h264 -n 10
Decode to the first 10 frame of input stream. If the xxx.h264 has only 5
frames then loop decoding from the beginning.
mpi_dec_test -i xxx.h264 -n -1 -v qf
Infinitely loop decoding xxx.h264.
It is usefull for performance test.
mpi_dec_multi_test -i xxx.h264 -n -1 -v qf -s 8
Parallelly infinitely loop run 8 decoders with same xxx.h264 input.
It is usefull for performance test.
-v q will disable each frame output log.
-v f will enable fps print per second.
-n -1 will enter infinite decode mode. Press <enter> will quit the loop.
Change-Id: I3d54123f0e9b9a85cb35e4fea71ebf665889750a
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Change to new reader slot interface.
2. Use reader slot in all decoder test case.
3. Do not async reset on eos to avoid eos stream issue.
Change-Id: If296f6555fd0e57f6931085f02b0378e41a5f2ce
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Add MPP_DEC_GET_CFG call before setup decoder config in mpi_dec_test.
Change-Id: I1ed8c2be44be9de0e4b1364a1401a81a9ecfd6e1
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Add MppDecCfg and string control to add more extra control.
Change-Id: Iead4bd938691af3eac76368421c04c3ebd1f6272
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. The pre_i_qp should use scale_qp to update rather then the start_qp
which has substracted by ip_qp_delta.
2. Reduce default ip_qp_delta to 2 for H.264 and 4 for H.265.
Change-Id: Ie43ba15c8bd524bd10aac6053306f72e8759370c
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Support different format files as input:
1. Normal file, e.g. h264/h265 raw stream
2. Ivf file , e.g vp8/vp9 stream with ivf header
Signed-off-by: Yandong Lin <yandong.lin@rock-chips.com>
Change-Id: I034693ae3e23bdde57c90ded7dd7248c50728122
1. Set these func into mpi_dec_utils
2. Note: num of threads: -n -> -s
Signed-off-by: Yandong Lin <yandong.lin@rock-chips.com>
Change-Id: If733fb0fdd7110313d2e140d3c50aad37260b6d2
Separate H.264 QP limit change flag into 3 flags
Change-Id: I658ab337569f8f715bde7633dce02b631a7d4239
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Update osd test in mpi_enc_test.
2. Remove osd test in mpi_multi_test.
3. Fix log info in vepu541.
Change-Id: I8056edf263df5571448782b3b8074f54956672ee
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
User data set is for multiple user data with uuid.
Change-Id: Iad952961ab6242ff3a14f554410144bebd3801ba
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
When the bitrate overflow the encoder can drop or encode skip frame.
drop_mode:
MPP_ENC_RC_DROP_FRM_DISABLED
- Do not drop frame when bitrate is too large.
MPP_ENC_RC_DROP_FRM_NORMAL
- Drop frame when bitrate is too large.
MPP_ENC_RC_DROP_FRM_PSKIP
- Encode force pskip frame to keep frame rate when bitrate overflow.
drop_thd:
The instantaneous bitrate overflow threshold to trigger drop frame.
drop_gap:
The minimum gap between two continuous drop frames.
0 - enable continnous drop frame.
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Change-Id: If17ee5f46ee03ae4ad958c8fad30a4a82f422118
if input file name is start with "/dev/video", default open camera
device as input.
Change-Id: I85d639ddb6fa5d99413ea75a0b088c79798dd6c8
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
Obsolete MPP_ENC_GET_EXTRA_INFO in vpu_api_legacy and mpi_enc_test.
Change-Id: I3209a1af112ca073e3f61bbff60d8c2844c00ed1
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
NOTE: It is important to clear output packet length to zero.
Or set packet pos and length to required valid value.
Change-Id: I8ddea1ee3c198bbd17381618b82ec5efab1d366e
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Config process should not use fixed local rc_mode value to setup.
Change-Id: I8cdfb049e676d34e50a0f11fd174d4eba5bfc24b
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Add temporal layer id print and error/discard value print.
2. Add mpp instance print to separate different instances.
Change-Id: I4d85e4ec80e957316a6aab82e3661e27389bebc8
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
