arm64: dts: rockchip: add Radxa E24C
- Apparently there's versions with either eMMC or SPI NOR and they share a pin - From https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr5.1/arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c.dts @8582469f117fdfd5d1ab88fa7e4e15c3b714bf24 - From https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr5.1/arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c-spi.dts @8582469f117fdfd5d1ab88fa7e4e15c3b714bf24
This commit is contained in:
Ricardo Pardini
Igor
parent
1bbe4f2966
commit
9434d86da1
3 changed files with 934 additions and 0 deletions
|
|
@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-hinlink-ht2.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-h96max-v56.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-mangopi-m28k.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e24c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e24c-spi.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2f.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-dictpen-test3-v20.dtb
|
||||
|
|
|
|||
53
arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c-spi.dts
Normal file
53
arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c-spi.dts
Normal file
|
|
@ -0,0 +1,53 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
// From https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr5.1/arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c-spi.dts @8582469f117fdfd5d1ab88fa7e4e15c3b714bf24
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3528-radxa-e24c.dts"
|
||||
|
||||
/ {
|
||||
model = "Radxa E24C SPI";
|
||||
compatible = "radxa,e24c-spi", "radxa,e24c", "radxa,rock-2", "rockchip,rk3528a";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
status = "okay";
|
||||
max-freq = <50000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspi_pins &fspi_csn0>;
|
||||
num-cs = <2>;
|
||||
|
||||
spi_flash: spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
loader@0 {
|
||||
label = "loader";
|
||||
reg = <0x0 0x1000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "disabled";
|
||||
};
|
||||
879
arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c.dts
Normal file
879
arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c.dts
Normal file
|
|
@ -0,0 +1,879 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
// From https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr5.1/arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c.dts @8582469f117fdfd5d1ab88fa7e4e15c3b714bf24
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/rk-input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
#include "dt-bindings/usb/pd.h"
|
||||
#include "rk3528.dtsi"
|
||||
#include "rk3528-linux.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa E24C";
|
||||
compatible = "radxa,e24c", "radxa,rock-2", "rockchip,rk3528a";
|
||||
|
||||
/delete-node/ chosen;
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio0;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
|
||||
vccio_sd: vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
states = <1800000 0x0
|
||||
3300000 0x1>;
|
||||
};
|
||||
|
||||
vcc_sd: vcc-sd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
rtl8367rb_power: rtl8367rb-power-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "rtl8367rb_power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8367rb_power_en>;
|
||||
};
|
||||
|
||||
hdmi_sound: hdmi-sound {
|
||||
status = "okay";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <128>;
|
||||
simple-audio-card,name = "rockchip-hdmi0";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai3>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_key>;
|
||||
autorepeat;
|
||||
|
||||
user-key {
|
||||
label = "KEY F15";
|
||||
linux,code = <KEY_F15>;
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
|
||||
sys-led {
|
||||
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
wan-led {
|
||||
gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
lan1-led {
|
||||
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
lan2-led {
|
||||
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
lan3-led {
|
||||
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
};
|
||||
|
||||
pwm_fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-min-state = <0>;
|
||||
cooling-max-state = <4>;
|
||||
cooling-levels = <0 64 128 192 255>;
|
||||
pwms = <&pwm2 0 40000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu_bus {
|
||||
bus-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in_vp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmiphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tve {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&tve_in_vp1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&iep {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iep_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&jpegd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&jpegd_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpp_srv {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rga2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rga2_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvtunnel {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rockchip_suspend {
|
||||
status = "okay";
|
||||
rockchip,sleep-debug-en = <1>;
|
||||
rockchip,sleep-mode-config = <
|
||||
(0
|
||||
| RKPM_SLP_ARMPD
|
||||
)
|
||||
>;
|
||||
rockchip,wakeup-config = <
|
||||
(0
|
||||
| RKPM_CPU0_WKUP_EN
|
||||
| RKPM_GPIO_WKUP_EN
|
||||
| RKPM_USBDEV_WKUP_EN
|
||||
)
|
||||
>;
|
||||
rockchip,pwm-regulator-config = <
|
||||
(0
|
||||
| RKPM_PWM0_M0_REGULATOR_EN
|
||||
| RKPM_PWM1_M0_REGULATOR_EN
|
||||
)
|
||||
>;
|
||||
};
|
||||
|
||||
&vdpp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vdd_1v8_s3>;
|
||||
};
|
||||
|
||||
&avsd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
max-frequency = <200000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
supports-sd;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
switch0: switch0@29 {
|
||||
compatible = "realtek,rtl8367rb", "realtek,rtl8365mb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <29 0>;
|
||||
dsa,member = <1 0>;
|
||||
reset = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan3";
|
||||
local-mac-address = [00 48 54 20 00 03];
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
local-mac-address = [00 48 54 20 00 02];
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
local-mac-address = [00 48 54 20 00 01];
|
||||
phy-handle = <&phy2>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "wan";
|
||||
local-mac-address = [00 48 54 20 00 00];
|
||||
phy-handle = <&phy3>;
|
||||
};
|
||||
|
||||
rtl8367rb_cpu_port: port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac1>;
|
||||
local-mac-address = [00 48 54 20 00 33];
|
||||
phy-mode = "rgmii";
|
||||
tx-internal-delay-ps = <2000>;
|
||||
rx-internal-delay-ps = <2000>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio {
|
||||
compatible = "realtek,smi-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
phy1: phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
phy2: phy@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
phy3: phy@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8367rb */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_miim
|
||||
&rgmii_tx_bus2
|
||||
&rgmii_rx_bus2
|
||||
&rgmii_rgmii_clk
|
||||
&rgmii_rgmii_bus>;
|
||||
|
||||
tx_delay = <0>;
|
||||
rx_delay = <0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy_pu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
vbus-supply = <&vcc_3v3_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
dr_mode = "otg";
|
||||
extcon = <&usb2phy>;
|
||||
phys = <&u2phy_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,usb2-lpm-disable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk805: rk805@18 {
|
||||
compatible = "rockchip,rk805";
|
||||
status = "okay";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
wakeup-source;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk805-clkout1", "rk805-clkout2";
|
||||
rockchip,system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
|
||||
rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-init-microvolt = <953000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic: DCDC_REG2 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <712500>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr_s3: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr_s3";
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: DCDC_REG4 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_1v8_s3: LDO_REG1 {
|
||||
regulator-name = "vdd_1v8_s3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18emmc: LDO_REG2 {
|
||||
regulator-name = "vcc_18emmc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v9_s3: LDO_REG3 {
|
||||
regulator-name = "vdd_0v9_s3";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m0_xfer>;
|
||||
|
||||
eeprom: bl24c16@50 {
|
||||
status = "okay";
|
||||
compatible = "atmel,24c16";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m0_xfer>;
|
||||
|
||||
hym8563: hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&threshold {
|
||||
temperature = <50000>;
|
||||
};
|
||||
|
||||
&soc_thermal {
|
||||
sustainable-power = <5000>; /* milliwatts */
|
||||
cooling-maps {
|
||||
map2 {
|
||||
trip = <&target>;
|
||||
cooling-device = <&pwm_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <8192>;
|
||||
};
|
||||
map3 {
|
||||
trip = <&threshold>;
|
||||
cooling-device = <&pwm_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <8192>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins =
|
||||
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi-bt {
|
||||
vcc_wifibt_en: vcc-wifibt-en {
|
||||
rockchip,pins =
|
||||
<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
user_key: user-key {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8367rb {
|
||||
rtl8367rb_power_en: rtl8367rb-power-en {
|
||||
rockchip,pins =
|
||||
<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins =
|
||||
<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc-clk {
|
||||
rockchip,pins =
|
||||
/* sdmmc_clk */
|
||||
<2 RK_PA5 1 &pcfg_pull_up_drv_level_3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/* GPIO0_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
/* GPIO1_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_B0-B3 */
|
||||
"", "", "PIN_5", "PIN_3",
|
||||
/* GPIO1_B4-B7 */
|
||||
"", "", "PIN_11", "PIN_7",
|
||||
|
||||
/* GPIO1_C0-C3 */
|
||||
"PIN_9", "PIN_13", "", "",
|
||||
/* GPIO1_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names =
|
||||
/* GPIO2_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names =
|
||||
/* GPIO3_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO3_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO3_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO3_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names =
|
||||
/* GPIO4_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_A4-A7 */
|
||||
"PIN_6", "PIN_8", "PIN_10", "PIN_14",
|
||||
|
||||
/* GPIO4_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_B4-B7 */
|
||||
"PIN_12", "", "", "",
|
||||
|
||||
/* GPIO4_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO4_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue