board: NanoPi M5 add initial support (#400)
This commit is contained in:
SuperKali
GitHub
parent
f07e92459e
commit
155d924426
3 changed files with 337 additions and 25 deletions
|
|
@ -333,6 +333,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-vehicle-evb-v10-linux.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-vehicle-evb-v20.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-vehicle-evb-v20-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-r76s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576s-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576s-evb1-v10-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576s-tablet-v10.dtb
|
||||
|
|
|
|||
336
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
Normal file
336
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
Normal file
|
|
@ -0,0 +1,336 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd.
|
||||
* (http://www.friendlyelec.com)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3576-nanopi5-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPi M5";
|
||||
compatible = "friendlyelec,nanopi-m5", "rockchip,rk3576";
|
||||
|
||||
/delete-node/ chosen;
|
||||
|
||||
gpio_keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&key1_pin>;
|
||||
|
||||
button@1 {
|
||||
debounce-interval = <50>;
|
||||
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "K1";
|
||||
linux,code = <BTN_1>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: led-0 {
|
||||
gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
label = "sys_led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
|
||||
lan_led: led-1 {
|
||||
gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
label = "lan_led";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan_led_pin>;
|
||||
};
|
||||
|
||||
wan_led: led-2 {
|
||||
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
label = "wan_led";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wan_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
rt5616_sound: rt5616-sound {
|
||||
status = "okay";
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
|
||||
simple-audio-card,name = "realtek,rt5616-codec";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,hp-det-gpio = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
simple-audio-card,hp-pin-name = "Headphone Jack";
|
||||
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphone Jack",
|
||||
"Microphone", "Microphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Headphone Jack", "HPOL",
|
||||
"Headphone Jack", "HPOR",
|
||||
"MIC1", "Microphone Jack",
|
||||
"Microphone Jack", "micbias1";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai2>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rt5616>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
clock-frequency = <200000>;
|
||||
pinctrl-0 = <&i2c5m3_xfer>;
|
||||
|
||||
rt5616: rt5616@1b {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "rt5616";
|
||||
reg = <0x1b>;
|
||||
clocks = <&mclkout_sai2>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&mclkout_sai2>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai2m0_mclk>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
clock-frequency = <200000>;
|
||||
pinctrl-0 = <&i2c8m2_xfer>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gpio-key {
|
||||
key1_pin: key1-pin {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
lan_led_pin: lan-led-pin {
|
||||
rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_pin: wan-led-pin {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdio_pwrseq {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
status = "okay";
|
||||
vqmmc-supply = <&vcc_1v8_s0>;
|
||||
sd-uhs-sdr104;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8822cs@1 {
|
||||
reg = <1>;
|
||||
compatible = "realtek,rtl8822cs";
|
||||
};
|
||||
};
|
||||
|
||||
&fspi1m1_pins {
|
||||
rockchip,pins =
|
||||
/* clk, d0~4 */
|
||||
<1 RK_PD5 3 &pcfg_pull_none>,
|
||||
<1 RK_PC4 3 &pcfg_pull_none>,
|
||||
<1 RK_PC5 3 &pcfg_pull_none>,
|
||||
<1 RK_PC6 3 &pcfg_pull_none>,
|
||||
<1 RK_PC7 3 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
&sfc1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspi1m1_csn0 &fspi1m1_pins>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
spi-nor@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
label = "sfc_nor";
|
||||
reg = <0>;
|
||||
m25p,fast-read;
|
||||
spi-max-frequency = <20000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart5m0_xfer &uart5m0_ctsn &uart5m0_rtsn>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8822cs-bt";
|
||||
enable-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
device-wake-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy_dp {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&vop {
|
||||
disable-win-move;
|
||||
};
|
||||
|
||||
&vp1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* GPIO Connector */
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/* GPIO0 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "PIN_12", "", "",
|
||||
/* GPIO0 C0-C7 */
|
||||
"", "PIN_05 [I2C0_SCL_M1]", "PIN_03 [I2C0_SDA_M1]", "",
|
||||
"PIN_22", "", "", "",
|
||||
/* GPIO0 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
/* GPIO1 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names =
|
||||
/* GPIO2 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "PIN_11 [UART8_TX_M1]", "PIN_13 [UART8_RX_M1]",
|
||||
/* GPIO2 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO2 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names =
|
||||
/* GPIO3 A0-A7 */
|
||||
"PIN_16 [UART3_TX_M0]", "PIN_18 [UART3_RX_M0]", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO3 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO3 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO3 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names =
|
||||
/* GPIO4 A0-A7 */
|
||||
"", "",
|
||||
"PIN_15", "PIN_29",
|
||||
"PIN_28", "PIN_07",
|
||||
"PIN_26", "PIN_27",
|
||||
/* GPIO4 B0-B7 */
|
||||
"PIN_23", "PIN_19",
|
||||
"PIN_21", "PIN_24",
|
||||
"PIN_10", "PIN_08",
|
||||
"", "",
|
||||
/* GPIO4 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO4 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&spi3 {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&spi3m2_csn0 &spi3m2_csn1 &spi3m2_pins>;
|
||||
|
||||
spidev0: spidev@0 {
|
||||
compatible = "rockchip,spidev";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&sai1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m1_xfer &uart2m1_ctsn &uart2m1_rtsn>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-0 = <&uart3m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart8 {
|
||||
pinctrl-0 = <&uart8m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -26,10 +26,6 @@
|
|||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdio;
|
||||
mmc2 = &sdhci;
|
||||
scsi0 = &lun0;
|
||||
scsi1 = &lun1;
|
||||
scsi2 = &lun2;
|
||||
scsi3 = &lun3;
|
||||
};
|
||||
|
||||
|
||||
|
|
@ -719,27 +715,6 @@
|
|||
&ufs {
|
||||
status = "okay";
|
||||
reset-gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
scsi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
lun0: lun@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
lun1: lun@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
lun2: lun@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
lun3: lun@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy {
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue